The Department was started in the year 2007. The Department offers a 4-Year full time B.E. programme in Aeronautical Engineering; a 2-year full time M.E. programme in Aeronautical engineering and it has a team of well-qualified faculty members with rich industrial and academic experience.
The Department gives a broad multi-disciplinary education enabling the students to succeed in wide variety of careers including the design, manufacture, maintenance and management of Aerospace Vehicles including airplanes, helicopters, gliders, launch vehicles, missiles and unmanned aerial vehicles.
ICT enhanced teaching techniques are also used in the department to supplement the regular chalk and talk lectures.
To empower the students with theoretical and practical knowledge in Aeronautical Engineering to face the challenging global requirement in areas of Aerospace Engineering.
To provide state of all technical education in tune with global challenges.
To impart both theoretical and practical knowledge with good professional and ethical insight.
To incorporate intellectual, ethical and social development of the students for becoming dynamic aeronautical engineers.
To initiate desires for undertaking entrepreneurship ventures and to create opportunities for lifelong learning
Career options for Aeronautical engineering graduates:
Govt. Research Labs - Defense Research and Development Organization (DRDO), National Aerospace Laboratories (NAL), Hindustan Aeronautics Limited (HAL), Indian Space Research Organization (ISRO), Gas Turbine Research Establishment (GTRE) etc.
Private Industries: General Electric, Boeing, Airbus, Pratt & Whitney, TATA Aerospace & Defense, QuEST Global, Mahindra Aerospace, Taneja Aerospace etc.
Aeronautical Development Agency (ADA), Aeronautical Development Establishment (ADE)
Commercial Airlines - Air India, SpiceJet, IndiGo, GoAir etc.
Defense Services
Drone Design and its Manufacturing.
Airport Authority of India.
Airport Design and Administration.
Directorate General of Civil Aviation (DGCA).
Various Public and Private Organizations Abroad.
Air Marshal
Scientist
Analyst
Pilot
Airworthiness Officer
Airport Ground Crew
Air Traffic Controller
Navigation Engineer
Flight Mechanics Engineer
Aircraft Production & Structural Engineer
Aircraft Technical officer & Air Safety Officer
Dr. R. MALLIKARJUNA VAGGAR
Professor & Head of The Department
Mail Id : mal.vaggar@gmail.com
Mobile No : +91 98945 83832
Beam test set-up with accessories
Dial Gauges with magnetic set up
Column Test Apparatus
Dial gauges
Diamond Intender
Electrical strain gauge with Indicators
Mechanical Extensometer
Weight and Weight Pans
Unsymmetrical bending of beams with accessories
Flexibility matrix for cantilever beam with accessories
Constant strength beam with accessories
Beam with combined loading with accessories
Wagner beam with accessories
Beam test set-up for vibration with accessories
Shear centre location for Closed section
Beam test set-up for vibration with accessories
Shear centre location for Closed section
Beam Test Set up to find Young’s Modulus
Column Test Apparatus
Beam test set-up with accessories
Dial Gauges with magnetic set up
Column Test Apparatus
Constant strength beam with accessories
Beam with combined loading with accessories
Aircraft Piston Engine with Propeller
Aero Jet Engine
Precision Instruments
Tool Sets
Hoist and Chain Pulley Block
NDT Equipment
TIG Welding machine and accessories
Pipe Bending Tube and Bend Flaring set
Power Drill
Low Pressure Riveting Tool and Riveting Gun
Heavy duty Power Drill
Wire Rope & Hand vice
Tools Set
Cessna 172 Aircraft
Accessories and Tools
Aircraft Battery
Barrel Opener and Pump
Watch Maker and Angle Finder
Aircraft Hard Wood Stopper
Push and Pull Trolley
Propeller model test set-up
Subsonic free / Wall jet
2D- Diffuser
Bomb- Calorimeter
Cascade Wind Tunnel
Subsonic Wind Tunnel
Hele Shaw Apparatus
Water Flow Channel
Small Aspect Ratio Model
We enhance a lot of skills to get placed in every drive to a place in MNCs.
We are encouraging our students to participate in all sessions.
Enhance your child with all the activities within their studies.
Encourage personal growth in your child.
Improve social skills by attending enrichment programs.
Mr. R.Karthikeyan |
Advanced Materials and Manufacturing Technology |
Easwari Engineering College |
27.09.21 to 8.10.21 |
14 |
Mr. R.Karthikeyan |
Advanced Manufacturing Technology |
SRM Institute of Science and Technology |
13.9.21 to 18.9.21 |
6 |
Mr. R.Karthikeyan |
Case Writing and Teaching |
National Institute of Industrial Engineering Mumbai |
22.11.21 to 26.11.21 |
5 |
Mr. R.Karthikeyan |
Communication skill and theory practices |
Integral University Lucknow |
14.6.21 to 25.6.21 |
14 |
Mr. R. Ramesh |
Advanced Materials and Manufacturing Technology |
Easwari Engineering College |
27.09.21 to 8.10.22 |
14 |
Mr. R. Ramesh |
Advanced Manufacturing Technology |
SRM Institute of Science and Technology |
13.9.21 to 18.9.21 |
6 |
Mr. R. Ramesh |
Communication skill and theory practices |
Integral University Lucknow |
14.6.21 to 25.6.21 |
14 |
Mr. R. Jini Raj |
Advanced Materials and Manufacturing Technology |
Easwari Engineering College |
27.09.21 to 8.10.21 |
14 |
Mr. R. Jini Raj |
Advanced Manufacturing Technology |
SRM Institute of Science and Technology |
13.9.21 to 18.9.21 |
6 |
Mr. R. Jini Raj |
3d Printing Basics and Applications |
MBM Engineering College Jodhpur |
25/10/2021 to 29/10/2021 |
5 |
Mr. R. Jini Raj |
Communication skill and theory practices |
Integral University Lucknow |
14.6.21 to 25.6.21 |
14 |
Mr. P.Panneer Selvam |
Advanced Materials and Manufacturing Technology |
Easwari Engineering College |
27.09.21 to 8.10.21 |
14 |
Mr. P.Panneer Selvam |
Advanced Manufacturing Technology |
SRM Institute of Science and Technology |
13.9.21 to 18.9.21 |
6 |
Mr. P.Panneer Selvam |
Cutting Edge Multidisciplinary research in the field of fluids |
NIT Rourkela |
11.10.21 to 15.10.21 |
5 |
Mr. P.Panneer Selvam |
Communication skill and theory practices |
Integral University Lucknow |
14.6.21 to 25.6.21 |
14 |
Mr. M. Pughalendi |
Advanced Materials and Manufacturing Technology |
Easwari Engineering College |
27.09.21 to 8.10.21 |
14 |
Mr. M. Pughalendi |
Advanced Manufacturing Technology |
SRM Institute of Science and Technology |
13.9.21 to 18.9.21 |
6 |
Mr. M. Pughalendi |
Advances in Composite Materials, Manufacturing Process and optimization Techniques/p> |
AMET Chennai |
1.6.21 to 14.6.21 |
14 |
Mr. M. Pughalendi |
Communication skill and theory practices |
Integral University Lucknow |
14.6.21 to 25.6.21 |
14 |
Mohammed HashimY |
Challenges & Opportunities in Electric Vehicle |
IPEC, Ghaziabad |
17.01.22 to 21.01.22 |
5 |
|
2022 |
R. Karthikeya, R. Sridhar, P. Panneer Selvam, R. Jini Raj |
Design and Analysis of Medium Utility Aircraft Landing Gear |
ECS Transactions |
107 (1) 1063-1071 (2022) |
|
2021 |
R. Jini Raj, P. Panneer Selvam, M. Pughalendi |
A Review of Aluminum Alloys in Aircraft and Aerospace Industry |
Journal of Huazhong University of Science and Technology |
vol 50 issue 4 |
|
2021 |
R.Jiniraj R. Venkatraman N. Dinesh |
Aerodynamic investigation of Morphing wing UAV with adjustable slotted airfoil configuration |
International journal of vehicle structures and systems |
Volume 13, Issue Jan2021 |
|
2021 |
P.Panneer Selvam, R.Jiniraj, M.Pughalendi. |
Computational Analysis of a corrugated dragon fly airfoil at low Reynolds number |
International Journal for Research in Engineering Application Management |
Volume 6,Issue 11 Feb2021 |
|
2021 |
R.Jiniraj T Lokesh D. Rajapatel |
Leading Edge shape optimization of white comb IL airfoil in transonic flow using a multi objective genetic algorithm |
International journal of vehicle structures and systems |
Volume 13, Issue Jan2021 |
|
2020 |
Mr. R. Karthikeyan P. Raja sekaran, S. Ganesh Kumar |
Hardness and Buckling Strength of Different Material Panel For a Wing Box Structure with FE analysis |
Materials Today, Proceedings |
-- |
|
2020 |
T Lokesh V Karthik K Alex N.Rajasekar |
Flying Rover |
Perspective in Communication , Embedded system and signal processing |
Volume 4, Issue 5 |
Qualification - Ph.D.,
Experience - 13 Years
No Of Years in PMC - 6.2 Years
No of Research Publications - 4.
Qualification - M.E., (Ph.D).,
Experience - 20.3 Years
No Of Years in PMC - 18.3 Years
No of Research Publications - 6.
Qualification - M.E., (Ph.D).,
Experience - 6.3 Years
No Of Years in PMC - 3.3 Years
No of Research Publications - 1.
Qualification - M.E.,(Ph.D).,
Experience - 6.3 Years
No Of Years in PMC - 4.2 Years
No of Research Publications - 7.
Qualification - M.Tech.,
Experience - 10.2 Years
No Of Years in PMC - 3.2 Years
No of Research Publications - 2.
Qualification - M.E.,
Experience - 6.3 Years
No Of Years in PMC - 3.3 Years
No of Research Publications - 7.
Qualification - M.E.,
Experience - 7.3 Years
No Of Years in PMC - 7.3 Years
No of Research Publications - 2.
Qualification - M.E.,
Experience - 3.2 Years
No Of Years in PMC - 3.2 Years
No of Research Publications - -
Qualification - M.E.,
Experience - 2.3 Years
No Of Years in PMC - 2.3 Years
No of Research Publications - 1.
Qualification - M.E.,
Experience - 2.3 Years
No Of Years in PMC - 2.3 Years
No of Research Publications - 5.
Qualification - M.E.,
Experience - 2.3 Years
No Of Years in PMC - 2.3 Years
No of Research Publications - 1.
Qualification - M.E.,
Experience - 8 Years
No Of Years in PMC - 11 Months
No of Research Publications - 1.
Qualification - M.E.,
Experience - 8.3 Years
No Of Years in PMC - 8.3 Years
No of Research Publications - 1.
|
25.06.2017 |
II/III |
Power of Success – Relax Training Programme |
Mr Raghunath, M/s Relax Training Organization |
26 |
|
21.09.2017 to 23.09.2017 |
II/III |
Kandeepam Ezhuga |
Kalaimamani Marabin Maindhan M.Muthiah& Team, Editor, NamathuNambikai |
26 |
|
06.10.2017 |
IV/VII |
Motivational Programme |
Kalaimamani Marabin Maindhan M.Muthiah& Team, Editor, NamathuNambikai |
12 |
|
18.10.2018 |
III/V |
Hands on Training UAV Modelling |
Mr. Asteria Asteria Aerospace Private Limited 2nd and 3rd Floor, Tellus Spaces, Khata No. 58/2782/7, Yelahanka 560064, Karnataka |
26 |
|
25.10.2018 |
IV/VII |
Training on Aircraft Wing Box Manufacturing by CNC wire Cutting |
PRASHANTH RADHAKRISHNAN Lead – Business Development GLOINNT Solutions Pvt. Ltd. No. 49 & 50, 1st Floor, 3rd Cross, Meganahalli, Kalyan Nagar, Bengaluru, India – 560043 prashanth.radhakrishnan@gloinnt.com |
12 |
|
22.01.2019 |
II,III/IV,V |
Training on CATIA Surface Modeling of Aircrafts |
Sivamoorthy Kanagalingam Aerospasce Engineer Mobile: +65 84303054 siva0039@e.ntu.edu.sg |
49 |
|
06.03.2021 |
III/VI |
100 Shortcuts in Aptitude Seminar by Channel B.Tech |
Mr .Pragadeeswara Prabhu 100 Shortcuts in Aptitude Channel B.Tech Coimbatore |
23 |
Mr. R. Karthikeyan,AP/Aero got “IEI BEST FACULTY ADVISOR AWARD” from IEI Aerospace Chapter activities-2018.
Mr. R. Jini Raj,AP/Aero got “Gold Winner Award” in 3rd Chapter convention on Quality Concepts, Quality circle forum of India, Hosur Chapter-2018.
Mr. P. Panneer Selvam,AP/Aero got “Gold Winner Award” in 4th Chapter convention on Quality Concepts, Quality circle forum of India, Hosur Chapter-2019.
Achievement 2019 - 2020
View DetailsAchievement 2018 - 2019
View Details|
Raghupathy.K |
III/V |
National Level Workshop |
SCAD Institute of Technology, Tiruppur |
10.07.2019 |
Participation |
|
Sivaraman. M Sandeep. N |
II/III |
National Level Workshop |
SCAD Institute of Technology, Tiruppur |
10.07.2019 |
Participation |
Our college has tied up with Wings of Aero to make our student's future bright and well furnished.
